Indian Environment Network

Paryavaran.com-Gateway to Indian Environment Market

Dear All, I want to know that how to carry out adequacy assessment for effluent treatment plant. Is there any specific methodology by CPCB or any governing bogy.Plz suggest methodology to carry to this study.

Views: 1377

Reply to This

Replies to This Discussion

Dear Mr. Patel

You can take the dimensions and capacities of each of the treatment units of the ETP and assess them with the effluent in question.

you may have to look into the removal of pollutants both by design and by coincidence for each of the treatment unit of the ETP and systematically assess the capacities of individual units.

Reddy

shall i required to measure flow? 

Dear sumit

before suggesting any solution , i would like to to know, are going to assess an existing ETP?. whate is meant for adequacy , is it performance assessment in term of reduction COD BOD.

if your objective is performance assessment,,,,, collect sample after each components and analyze it for your desired components. the obtained results will help you to assess the performance of the ETP system and will tell you, what measure are needed

dear sir i am going to  assess adequacy of existing ETP. Performance assessment i can do based on removal of parameter from each unit. but i want to carry out adequacy first.

Dr. PAWAN KR. SINGH said:

Dear sumit

before suggesting any solution , i would like to to know, are going to assess an existing ETP?. whate is meant for adequacy , is it performance assessment in term of reduction COD BOD.

if your objective is performance assessment,,,,, collect sample after each components and analyze it for your desired components. the obtained results will help you to assess the performance of the ETP system and will tell you, what measure are needed

thnks u so much sir,,,,,,,,sir i have this document but they have not mention about adeqaucy .so if u have methodology for adequacy plz let me know.

you can calculate the volume of various treatment units along with the detention time offered to each unit, the sum of hydraulic loading/sum of detention times offered should be within the total hydraulic loading rate (flow rate)

can  i have some example ,,,or any technical detail on this . my mail id is sumitvpatel@gmail.com

Gunjan Gupta said:

you can calculate the volume of various treatment units along with the detention time offered to each unit, the sum of hydraulic loading/sum of detention times offered should be within the total hydraulic loading rate (flow rate)

Reply to Discussion

RSS

Paryavaran.com -online webportal to network and do business and philanthropy with Indian Environment Organizations and Professionals


Notes

Network of Indian Environment Professionals LLC

Created by Chandra Kishore Feb 5, 2010 at 3:22pm. Last updated by Chandra Kishore Jan 20, 2020.

Notes Home

Created by Chandra Kishore Oct 5, 2009 at 3:19pm. Last updated by Chandra Kishore Apr 29, 2011.

© 2024   Created by Chandra Kishore.   Powered by

Badges  |  Report an Issue  |  Terms of Service