E-WASTES MANAGEMENT

[Binay kumar gupta]

Industrial revolution followed by the advances in information technology during the last century has radically changed people's lifestyle. Although this development has helped the human race, mismanagement has led to new problems of contamination and pollution. The technical prowess acquired during the last century has posed a new challenge in the management of wastes. For example, personal computers (PCs) contain certain components, which are highly toxic, such as chlorinated and brominated substances, toxic gases, toxic metals, biologically active materials, acids, plastics and plastic additives. The hazardous content of these materials pose an environmental and health threat. Thus proper management is necessary while disposing or recycling e­wastes.

These days computer has become most common and widely used gadget in all kinds of activities ranging from schools, residences, offices to manufacturing industries. E-toxic components in computers could be summarized as circuit boards containing heavy metals like lead & cadmium; batteries containing cadmium; cathode ray tubes with lead oxide & barium; brominated flame­retardants used on printed circuit boards, cables and plastic casing; poly vinyl chloride (PVC) coated copper cables and plastic computer casings that release highly toxic dioxins & furans when burnt to recover valuable metals; mercury switches; mercury in flat screens; poly chlorinated biphenyl's (PCB's) present in older capacitors; transformers; etc. Basel Action Network (BAN) estimates that the 500 million computers in the world contain 2.87 billion kgs of plastics, 716.7 million kgs of lead and 286,700 kgs of mercury. The average 14-inch monitor uses a tube that contains an estimated 2.5 to 4 kgs of lead. The lead can seep into the ground water from landfills thereby contaminating it. If the tube is crushed and burned, it emits toxic fumes into the air.

EFFECTS ON ENVIRONMENT AND HUMAN HEALTH

Disposal of e-wastes is a particular problem faced in many regions across the globe. Computer wastes that are landfilled produces contaminated leachates which eventually pollute the groundwater. Acids and sludge obtained from melting computer chips, if disposed on the ground causes acidification of soil. For example, Guiyu, Hong Kong a thriving area of illegal e-waste recycling is facing acute water shortages due to the contamination of water resources.

This is due to disposal of recycling wastes such as acids, sludges etc. in rivers. Now water is being transported from faraway towns to cater to the demands of the population. Incineration of e-wastes can emit toxic fumes and gases, thereby polluting the surrounding air. Improperly monitored landfills can cause environmental hazards. Mercury will leach when certain electronic devices, such as circuit breakers are destroyed. The same is true for polychlorinated biphenyls (PCBs) from condensers. When brominated flame retardant plastic or cadmium containing plastics are landfilled, both polybrominated dlphenyl ethers (PBDE) and cadmium may leach into the soil and groundwater. It has been found that significant amounts of lead ion are dissolved from broken lead containing glass, such as the cone glass of cathode ray tubes, gets mixed with acid waters and are a common occurrence in landfills.

Not only does the leaching of mercury poses specific problems, the vaporization of metallic mercury and dimethylene mercury, both part of Waste Electrical and Electronic Equipment (WEEE) is also of concern. In addition, uncontrolled fires may arise at landfills and this could be a frequent occurrence in many countries. When exposed to fire, metals and other chemical substances, such as the extremely toxic dioxins and furans (TCDD tetrachloro dibenzo-dioxin, PCDDs-polychlorinated dibenzo­dioxins. PBDDs-polybrominated dibenzo-dioxin and PCDFs­poly chlorinated dibenzo furans) from halogenated flame retardant products and PCB containing condensers can be emitted. The most dangerous form of burning e-waste is the open-air burning of plastics in order to recover copper and other metals. The toxic fall-out from open air burning affects both the local environment and broader global air currents, depositing highly toxic by products in many places throughout the world.

Summeries below depicts the health effects of certain constituents in e-wastes. If these electronic items are discarded with other household garbage, the toxics pose a threat to both health and vital components of the ecosystem. In view of the ill-effects of hazardous wastes to both environment and health, several countries exhorted the need for a global agreement to address the problems and challenges posed by hazardous waste. Also, in the late 1980s, a tightening of environmental regulations in industrialized countries led to a dramatic rise in the cost of hazardous waste disposal. Searching for cheaper ways to get rid of the wastes, "toxic traders" began shipping hazardous waste to developing countries. International outrage following these irresponsible activities led to the drafting and adoption of strategic plans and regulations at the Basel Convention. The Convention secretariat, in Geneva, Switzerland, facilitates and implementation of the Convention and related agreements. It also provides assistance and guidelines on legal and technical issues, gathers statistical data, and conducts training on the proper management of hazardous waste.

 

Effects of E-Waste constituent on health

Source of e-wastes

Constituent

Health effects

Solder in printed circuit boards, glass panels and gaskets in computer monitors

Lead (PB)

• Damage to central and peripheral nervous systems, blood systems and kidney damage.
• Affects brain development of children.

Chip resistors and semiconductors

Cadmium (CD)

• Toxic irreversible effects on human health.
• Accumulates in kidney and liver.
• Causes neural damage.
• Teratogenic.

Relays and switches, printed circuit boards

Mercury (Hg)

• Chronic damage to the brain.
• Respiratory and skin disorders due to bioaccumulation in fishes.

Corrosion protection of untreated and galvanized steel plates, decorator or hardner for steel housings

Hexavalent chromium (Cr) VI

• Asthmatic bronchitis.
• DNA damage.

Cabling and computer housing

Plastics including PVC

Burning produces dioxin. It causes

• Reproductive and developmental problems;
• Immune system damage;
• Interfere with regulatory hormones

Plastic housing of electronic equipments and circuit boards.

Brominated flame retardants (BFR)

• Disrupts endocrine system functions

Front panel of CRTs

Barium (Ba)

Short term exposure causes:

• Muscle weakness;
• Damage to heart, liver and spleen.

Motherboard

Beryllium (Be)

• Carcinogenic (lung cancer)
• Inhalation of fumes and dust. Causes chronic beryllium disease or beryllicosis.
• Skin diseases such as warts.

[dr. hitesh sukhwal]

Thanks sir very informative. Regards

 

[GOPI KANTA GHOSH]

Responsibility must be defined by law with scientific information...

[Dr Shekhar Upadhyay]

Thanks for information

sir,

I request you to provide norms for calculating E-waste in Infrastructural projects.

Like for solid waste we have norms, for water demand we have norms but for E-waste I am unable to find any norms.

 

regards

 

Dr. Shekhar

[MUTHAMIZH SELVAN]

Dear B k Gupta Ji,

Thank u for ur valuable inputs,

But, currently do we have any legislation for e-waste bounded for industries?

 

Regards,

M Selvan

 

 

[Rangan Chakraborty]

what could be best solution for e waste disposal. what is the role & responsability of an environmentlogist